• DSC_0007
  • DSC_0006
  • DSC_0008
  • DSC_0009
  • DSC_0010
  • DSC_0011
1

HP

HP Aruba 2530 8G PoE+ Switch J9774A J9774-60001 J9774-61002 (Refurbished)

$ 577.32 USD
$ 577.32 USD
$ 0.00 USD
Worldwide shipping | MY IT Spare Parts
Worldwide shipping
Secure payments | MY IT Spare Parts
Secure payments
Authentic products | MY IT Spare Parts
Authentic products
View More










Aruba 2530-8G-PoE+ Switch (J9774A)



System Specifications
Description
I/O ports and slots

  • 8 RJ-45 autosensing 10/100/1000 PoE+ ports (IEEE 802.3 type 10BASE-T, IEEE 802.3u type 100BASE-TX, IEEE 802.3ab type 1000BASE-T, IEEE 802.3at PoE+)

  • Media type: Auto-MDIX

  • Duplex: 10BASE-T/100BASE-TX: Half or full

  • 1000BASE-T: Full only

  • 2 dual-personality ports; each port can be used as either an RJ-45 10/100/1000 port (IEEE 802.3 type 10Base-T; IEEE 802.3u type 100Base-Tx; IEEE 802.3ab 1000Base-T GbE) or as a SFP slot (For use with SFP transceivers)

Additional ports and slots
1 Dual-Personality (RJ-45 or USB Micro-B) serial console port
Memory and processor

  • ARM9E @ 800 MHz, 128MB flash

  • Packet buffer size: 1.5MB dynamically allocated, 256MB DDR3 DIMM

Mounting

  • Mounts in an EIA-Standard 19 in telco rack or equipment cabinet (Rack-Mounting kit available)

  • Horizontal surface mounting

  • Wall mounting

Management

  • IMC

  • CLI

  • Web browser

  • Configuration menu

  • Out-of-Band management (Serial RS-232C or Micro-USB)

  • IEEE 802.3 Ethernet MIB

  • Repeater MIB

  • Ethernet interface MIB

Performance (IPv6 Ready Certified)
Description
1000Mb latency
< 2.6 µs (LIFO 64-byte packets)
100Mb latency
< 7.4µs (LIFO 64-byte packets)
Throughput
Up to 14.8 million p/s (64-byte packets)
Switching capacity
20 Gb/s
MAC address table size
16000 entries
Physical Specifications
Description
Dimensions (H x W x D)

  • 4.45 x 25.4 x 15.95 cm (1.75 x 10.00 x 6.28 in)

  • 1U height

Weight
1 kg (2.2 lb)
Electrical Specifications
Description
Maximum heat dissipation
65 BTU/hr (68.58 kJ/hr), (Switch only: 65 BTU/hr; combined switch + maximum PoE devices: 293 BTU/hr)
Voltage
100 - 127 / 200 - 240 V ac
Current
1.4 A
Idle power1
13.4 W
Maximum power rating2
86 W
PoE power
67 W
Frequency
50/60 Hz
NOTE:
  1. Idle power is the actual power consumption ofthe device with no ports connected
  2. Maximum power rating and maximum heat dissipation are the Worst-Case theoretical maximum numbers provided for planning the infrastructure with fully loaded PoE (If equipped), 100% traffic, all ports plugged in,and all modules populated. PoE power is the total power budget available to all PoE ports
Environmental Specifications
Description
Operating temperature
0° to 45°C (32° to 113°F)
Operating relative humidity
15% to 95% @ 40°C (104°F), non-condensing
Non-Operating/storage temperature
(-40°) to 70°C ((-40°) to 158°F)
Non-Operating/storage relative humidity
15% to 90% @ 65°C (149°F), noncondensing
Altitude
Up to 3 km (10,000 ft)
Acoustic
Power: 0 dB, pressure: 0 dB
Safety Certifications
Description
Safety

  • UL 60950-1

  • CAN/CSA 22.2 No. 60950-1

  • EN 60825

  • IEC 60950-1

  • EN 60950-1

Emissions

  • FCC Class A

  • EN 55022/CISPR-22 Class A

  • VCCI Class A

Immunity

  • Generic: EN 55024, CISPR 24

  • EN: EN 55024, CISPR 24

  • ESD: IEC 61000-4-2

  • Radiated: IEC 61000-4-3

  • EFT/Burst IEC: 61000-4-4

  • Surge: IEC 61000-4-5

  • Conducted: IEC 61000-4-6

  • Power frequency magnetic field: IEC 61000-4-8

  • Voltage dips and interruptions: IEC 61000-4-11

  • Harmonics: EN 61000-3-2, IEC 61000-3-2

  • Flicker: EN 61000-3-3, IEC 61000-3-3

NOTE:
  • IEEE 802.3az applies to Gb models only
  • IEEE 802.3at and IEEE 802.3af apply to PoE+ models only
  • When using SFPs with this product, SFPs with revision B or later (Product number ends with the letter B or later, e.g., J4858B, J4859C) are required